BROWNELLS MEDIUM STRENGTH BLUE THREADLOCKERS

Medium hold threadlocker trusted by professionals!

In applications where you need a medium strength threadlocker to hold but still be able to loosen with standard handtools, Brownells Medium Strength Blue Threadlokcer can be trusted.This anaerobic threadlocker has good temperature and solvent resistance.

Available in two convenient sizes; a 10 ml (.34 oz bottle) for repeated use and 1.8ml one time use pillow pack. Brownells Medium Strength Blue Threadlocker should be used where shock and vibration may cause metal thread engagement to loosen.

• Made in the USA
• Medium hold blue threadlocker
• Not recommended for use with plastics or in oxygen rich environments
• May cause skin irritation and eye irritation, see SDS

Instructions for Use:

Parts must be clean, dry and free from oil or grease. Brownells Medium Strength Blue Threadlocker cures through evaporation of water in order to build strength. It can be applied wet to threads and tightened or used to coat threads and allowed to dry before installation. Once set, disassembling parts with the threadlocker applied is achievable with standard tools. It is recommended to clean threads thoroughly with a brush and reapply the threadlocker when reassembling parts.

Curing Time and Performance Temperature Range:

Fixture Time: 15 - 20 minutes @ 72° F / 22° C

Full Cure Time: 24 Hours @ 72° F / 22° C

Temperature Range: -60° F to 300° F / -51° C to 150° C