SEAL 1™ CLP PLUS® is a non-toxic bio-based cleaner, lubricant, protectant.
- Liquefies carbon on contact
- Fouling residues - wipes clean after two - three applications / seasonings
- Subsequent cleaning times are greatly reduced
- Micro protective barrier inhibits residue buildup such as copper, lead, sand, dust and dirt
- Apply liberally to bore brush run brush up and down bore numerous times.
- Apply liberally to cotton bore patch or use pre-saturated SEALSkinz™
- Using a tight fitting jag patch combination run patch up and down bore two or three times.
- Repeat until patch comes clean.
- Run dry patch up and down bore to remove any excess.
- After two or three applications in most cases you will experience an increase in muzzle velocity.
All Other Cleaning:
- Apply liberally and scrub until clean.
- Wipe clean with cloth or bore cleaning patch.
Storage and Protection:
- For fastest result it is best to treat you gun while it is warm.
- Apply SEAL 1 CLP PLUS® to all surfaces and let soak in.
- Wipe with clean cloth to remove any excess
- After two or three applications you should only need to wipe down with a SEALSkinz™ Cloth or repeat this process occasionally.